The running belt of all treadmills should be adjusted before leaving the factory and after installation, but it may be loose after using for a period of time. For example: the user has the phenomenon of stopping and slipping when running. When this phenomenon occurs, adjust the adjusting bolt of running belt synchronously from left to right according to the unit of half circle in clockwise direction. If the running belt is too loose, the running belt and the roller will slide, but if it is too tight, it is easy to increase the load of the motor and damage the motor, running belt and drum.

Running with alignment

1. Put the electric treadmill on a level surface.

2. Use an electric treadmill to run at about 3.5 km / h.

3. If the running belt deviates to the left, rotate the left adjusting bolt 1 / 2 turn clockwise, and then rotate the right adjusting bolt 1 / 2 turn anticlockwise

4. If the running belt is deflected to the right, rotate the right adjusting bolt 1 / 2 turn clockwise, and then turn the left adjusting bolt 1 / 2 turn anticlockwise